Product specifications

CashFlow
®
9520 / 9524 / 9528 Design Guide
©
MEI., 2003 Page 20 Rev: G1
Separator Connector (2)
This connector is used for connection to the CashFlow
®
9524 4-way or CashFlow
®
9528 8-
way separators only. This is identified by a grey panel on the separator.
Connector type used:- 20 way Molex DIL 901-42-0020.
WARNING: Do not connect ME129, ME126 Active or ME126 Security separators to
this product or damage may result. This is identified by a panel that has the facility to
fit a route plug into the separator.
Route Input Lines - Routes 1-7
The CF9528 exit routes are marked as Route (1, 2, 3, 4, 5, 6 & 7) with (8) being the default
exit route, as standard.
Routes 1-7 on CF9528 refer to the coin routes 1 to 7, with 1 having high priority and 7 low
priority.
Routes 1-7 on CF9524 refer to the 4 coin route outputs A, B, C and D as shown in the
following table.
Note: (d) is the same route as D but has a higher priority.
The CF9528 exit routes are marked as Route (1, 2, 3, 4, 5, 6 & 7) with (8) being the default
exit route.
Solenoid 3 Solenoid 2 Solenoid 1
9528 Route 9524 Route
110 1(d)
111 2(c)
100 3(a)
101 4(b)
011 5C
010 6D
001 7B
000 8A