Product specifications

CashFlow
®
9520 / 9524 / 9528 Design Guide
©
MEI., 2003 Page 25 Rev: G1
Y-chute Interface Connector
Connections to the Y-chute are made with a Molex type 6471 19-way. This connector is
fitted to the dual entry (coin and token) system only. It provides an interface for the machine
to inhibit acceptance of any coin/token and also gives a signal to the validator to inhibit coins
during token input and to inhibit tokens during coin input.
This interface is not supplied with the single entry system.
Pin No. Function Input / Output Notes
1 12 Volts Output 12 volts supply to the validator
2 Inhibit F Output Inhibit signals to the validator
3 Inhibit E Output
4 Inhibit D Output
5 Inhibit C Output
6 Polarisation - -
7 Inhibit B Output Inhibit signals to the validator
8 Not Used - -
9 Not Used - -
10 0 Volts Output 0 volts common to the validator
11 0 Volts Input 0 volts common input to Y-chute
12 Polarisation - -
13 Not Used - -
14 Inhibit B Input Inhibit signal from the machine
15 Inhibit C Input
16 Inhibit D Input
17 Inhibit E Input
18 Inhibit F Input
19 12 Volts Input 12 volts input to the Y-chute