Owner`s manual

Wireless Receiver Mounting Back Plates

U N IVERS AL BP

Back plate for all Ikegami, Panasonic, Hitachi and Grass Valley cameras for mounting

wireless receiver plates to factory supplied version Gold Mount on DVCPRO and P2

type cameras.

JVC -BP

Back plate for mounting a wireless receiver plate to a Q-X2, QR-JVC AUTO, or QR-JVC DIGI

Gold Mount.

Wireless Receiver Mounting

A BWMK - K I T

Universal wireless receiver mounting kit attaches directly to the metal plate of any Gold

Mount to mount any type of wireless receiver or hard drive. Adjusts to closely ﬁt to camera

with any logic Series Battery on the side or behind the battery.

Note: Wireless mounting back plate may be needed as speciﬁed in above section.

A BWMK -SI

Universal wireless receiver side mounting plate only. Unit attaches directly to the metal

back plate of any Gold Mount to mount any type of wireless receiver or hard drive along side

the battery.

W R B-185*

Wireless receiver box which holds any wireless receiver similar to Lectrosonics style #CRT-

175, 185 or 187 and UCR190.Size (inside dimensions): 4”H x 3”L x 1.25”W (10 x 7.5 x 3.49 cm)

W R B-201*

Wireless Receiver Box which will hold any wireless receiver similar to Lectrosonics style

#UCR-201 or UCR-401. Size (inside dimensions): 3.97”H x 2.96”L x 1.37”W (10 x 7.5 x 3.49cm)

W R B - 2 0 0 *

Wireless Receiver box which will hold any wireless receiver similar to Lectrosonics style #

UCR-195, UCR-195D, UCR-200, UC-210, UCR-211, UCR-411, UCR-205 and AJA model HD10A

and HD 10MD3. Size (inside dimensions): 4”H x 3.5”L x 1.37”W (10.1 x 8.8 x 3.45cm)

*Must be used in conjunction with an ABWMK-KIT and ABWMK-SI.

Q R -WR B-25

Wireless receiver box ﬁts between Logic Series Battery and camera Gold Mount to accept

any 25¬pin insert style wireless receivers (such as Sennheiser #EK-3241, EK-3041, RAMSA

#WX-RM770, TSP #WD-900R or Lectrosonics SR Series W/SRUNI adapter.) The QR-WRB-25

also provides an extra slot for an additional receiver for cameras already equipped to accept

one receiver. Adds only 1” to camera length. The receiver uses power from camera battery.

Standard 3p XLR audio out connector. Size: 5.75”H x 3.80”L x 2.38”W (14.5 x 9.7 x 5.8cm)

ABWMK-KIT with WRB-200

QR-WRB-25