ORIGIN 5 COMBO USER MANUAL
ENGLISH CONGRATULATIONS ON PURCHASING YOUR MARSHALL ORIGIN AMPLIFIER. THE ORIGIN PROVIDES USEFUL MODERN FEATURES INCLUDING: TILT TONE CONTROL, TO BLEND BETWEEN TWO DISTINCTLY DIFFERENT VOICES, AND POWER STAGING, MAKING IT ADAPTABLE TO A VARIETY OF PLAYING ENVIRONMENTS. WE HOPE YOU ENJOY YOUR NEW AMPLIFIER AS MUCH AS WE HAVE ENJOYED DESIGNING AND BUILDING IT FOR YOU.
Warning: Before going any further, make sure that your amplifier is compatible with your mains electricity supply. If you have any doubt, please seek help from a qualified technician β your Marshall dealer can help you with this. MAINS INPUT & FUSE: The specific mains input voltage rating that your amplifier has been manufactured for is indicated on the rear panel of the amplifier.
Your Origin 5 combo amplifier has been designed to offer the perfect solution for players looking to create great music. VALVES 2x ECC83 + 1x EL84 SPEAKER Celestion Eight-15 8β The tone of the Origin 5 combo amplifier is unmistakeably Marshall using 2x ECC83 preamp valves and 1x EL84 power valve to generate rich harmonics and exceptional tone. While the amplifier itself is a single channel unit, the design of the tone circuit means it offers two very distinctive voices.
ENGLISH PULL BOOST EQUALISATION LOW HIGH INPUT VOLUME TILT BASS MIDDLE TREBLE 1 2 3 4 5 6 1. INPUT Connect to your guitar using a ΒΌβ instrument cable. 2. VOLUME Control the output volume and gain of your amplifier. Pull this knob to engage the gain boost feature. This control can be operated using a 2-way foot switch (PEDL-90016).
ENGLISH PULL BOOST EQUALISATION LOW HIGH INPUT VOLUME TILT BASS MIDDLE TREBLE 1 2 3 4 5 6 4. BASS 8. OUTPUT LEVEL 5. MIDDLE Note: reducing the power output allows you to drive the power stage harder at low volumes. This provides the ability to benefit from the rich tonal qualities that a valve power amp can create without the need to operate at loud volume levels. Controls the lower frequency of your sound. Controls the middle frequency of your sound. 6.
ENGLISH 5 4 3 1. MAINS INLET 3. EFFECTS LOOP RETURN 2. 16 OHM OUTPUT 4. EFFECTS LOOP SEND Note: always ensure before connecting and disconnecting speaker loads from your Origin that it is switched off first. 5. FOOT SWITCH Connect your amplifier to the supplied mains lead using this socket. Your Celestion Eight-15 speaker is connected here. Return your signal from your effects or outboard processor here. Send your signal to your effects or outboard processor from this socket.
WHILST THE INFORMATION CONTAINED HEREIN IS CORRECT AT THE TIME OF PUBLICATION, DUE TO ITS POLICY OF CONSTANT IMPROVEMENT AND DEVELOPMENT, MARSHALL AMPLIFICATION PLC RESERVES THE RIGHT TO ALTER SPECIFICATIONS WITHOUT PRIOR NOTICE. MARSHALL AMPLIFICATION PLC, DENBIGH ROAD, BLETCHLEY, MILTON KEYNES, MK1 1DQ, ENGLAND. T: +44 (0) 1908 375411 F: +44 (0) 1908 376118 MARSHALL AMPLIFICATION PLC REGISTERED IN ENGLAND REGISTERED NUMBER: 805676 BOOK-91018-V.