Manual

4. Specifications
Accuracy: Pressure: ±0.035% of full scale
mA, %4-20 mA, %10-50 mA: ±0.025% of full scale
V: ±0.025% of full scale
Temperature Coefficient: 0.01% FS/°C from 0 to 18°C and 28 to 50°C
Loop Power: 24VDC, current limited to a nominal 24 mA
Switch Test: Dry (unpowered) contacts only, nominal 24 mA @ 24
VDC excitation current supplied to contact
Modes of Operation: Gauge, Differential,Vacuum (Vacuum to -5 PSI)
Media Compatability: Clean, non-corrosive gasses
Operating Temperature: 0 to 50°C (32 °F to 122°F)
Storage Temperature: -20 to 60°C (-18 °F to 154°F)
Electrical Protection: Fuse, 1/8Amp
Display: 2 Line, 16 character dot matrix
Power: Internal Ni-Cd Battery or AC adapter that simultaneously
charges battery and powers the calibrator
Size: (HWD) 343mm x 292mm x 140mm (13.5" x 11.5" x 5.5")
Weight: 7.25 kg (16 lbs.)
Ranges DPC-30 DPC-100
PSI –5 to 30.000 –5 to 100.00
BAR –0.345 to 2.0680 –0.345 to 6.895
mmHg –258.6 to 1551.0 –259 to 5172
kPa –34.47 to 206.80 –34.5 to 689.5
inH
2
O@20°C –138.5 to 831.0 –138.5 to 2770.7
inH
2
O@4°C –138.4 to 830.4 –138.4 to 2768.1
inH
2
O@60°C –138.5 to 831.2 –138.5 to 2770.1
cmH
2
O@4°C –352.0 to 2109.0 –352.0 to 7031
cmH
2
O@20°C –352.0 to 2109.0 –352.0 to 7031
mmH
2
O@4°C –3515 to 21090 –3515 to 70308
mmH
2
O@20°C –3515 to 21090 –3515 to 70308
mBAR –344.0 to 2068.0 –345.0 to 6895
Kg/cm
2
–0.3515 to 2.1090 –0.352 to 7.0301
mA 0.00 to 52.00 0.00 to 52.00
Volts 0.000 to 20.000 0.000 to 20.000
%4-20mA –25% to 105% –25% to 105%
%10-50mA –25% to 105% –25% to 105%
Switch open/close open/close
7