Instructions / Assembly

ManualsBrandsMartha Stewart Living ManualsStorage & OrganizationHudson 2 in. H Natural Closet Slanted Shoe Shelves (Set of 2)

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Storage Factory No.: 15548 Page #1 of 6

MARTHA STEWART LIVING CLOSET SHOE SHELF

1 7/8"Hx28"Wx19"D ANTIQUE WHITE / NATURAL

Assembly Instructions

HDC #:2944700410/2944700950

MFG #:WSMSL-SS2W&WSMSL-SS2N

Please read over the instructions; it will be a

time-saver in the long run.

Note: Before Assembly, please be sure to work on a soft flat

surface to avoid any damage to the finish.

Summary of content (6 pages)

PAGE 1
MARTHA STEWART LIVING CLOSET SHOE SHELF 1 7/8"Hx28"Wx19"D ANTIQUE WHITE / NATURAL Assembly Instructions HDC #:2944700410/2944700950 MFG #:WSMSL-SS2W&WSMSL-SS2N Please read over the instructions; it will be a time-saver in the long run. Note: Before Assembly, please be sure to work on a soft flat surface to avoid any damage to the finish. THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Whalen Storage Factory No.
PAGE 2
MAXIMUM RECOMMENDED WEIGHT LOADS SHELF MAXIMUM LOAD: 25 LBS. (11.4KG) This unit is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury. ASSEMBLY TIPS Read all instructions BEFORE assembly. Remove all hardware from box and sort by size. Check to see that all hardware and parts are present BEFORE assembling. Ask a friend to assist you with the assembly of this furniture.
PAGE 3
Important Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-abrasive surface. You will need the parts identified on page 3 and 4 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH DAMP CLOTH. Insert Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY. 1 2 3 X 4 FINAL X CAM LOCK SYSTEM OPERATION HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS 1.
PAGE 4
Parts List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A-Front Molding (x 2) B-Shelf (x 2) Hardware List Please read completely through the instructions and verify that all hardware listed are present before beginning assembly.
PAGE 5
Assembly Instructions 3. Insert two Wood Dowels (3) into the inner end holes of the Shelf (B). Tap in with a mallet, if necessary. Make sure you use a small amount of glue with both ends of all dowels. NOTE: It is very important to use a small amount of glue on both ends of dowels. 4. Align the inserted Wood Dowels (3) on the Shelf (B) with the drilled holes on the Front Molding (A) and press them together.
PAGE 6
Care and Maintenance  Use a soft, clean cloth that will not scratch the surface when dusting.  Use of furniture polishes is not necessary. Should you choose to use polishes, test in an inconspicuous area first.  Using solvents of any kind on your furniture may damage the finish.  Never use water to clean your furniture as it may cause damage to the finish.  Always use coasters under beverage glasses and flowerpots.  Liquid spills should be removed immediately.