Measurement Guide

REPORT NO.: 85122610712
Form Owner: THD QA - Issue Date: 6/23/08 - Version #: 4
Proprietary & Confidential Page 2 of 32
The Home Depot Company Information
1. Product Requirements
1.1 GENERAL REQUIREMENT
Item# Item Qty
Style / Feature /
Finish / Color
Dimension /
Measurement
Tolerance Material
See
table 1
See table 1 See table 1 White, Oak, Brown,
Mahogany
See table 1 For
dimension:
+/-5%;
For weight:
+/-10%
Wood
1.2 PRE-PURCHASE TESTING RESULT
This product must
achieve a rating of
“Good” under The
Home Depot’s Pre-
Purchase Testing
Program or
“unsatisfactory” but
with THD’S PPT
Waiver.
PPT REPORT NO:
85122610712
RATING:
GOOD
REMARK:
N/A
1.3 PERFORMANCE TESTS
Test Property Test Requirement Comments
Moisture Content Test
of natural wood
material only
The moisture content of wood product intended for indoor use
shall be within 4%-13%; The moisture content of wood product
intended for outdoor use shall be within 8% - 12%;
Nil
Coating Adhesion Test
on Coating / Painting
Component (if
available
1. Cross Hatching Test: Coated metal items shall be rated per
the scale specified in the standard when tested as appropriate.
Cut coating as specified, apply tape to cuts, then remove tape
after 2 min and examine for removal of coating from substrate.
Photograph if any plating / finish is removed. Select cutting
method as follows:
Use the cutter to make parallel cut so that space the
cuts 2mm apart and make six cuts: 6 lines (columns) x
6 lines (row) lead to 2mm x 2mm x 25 grids.
2. Tape Test: Coated nonmetallic component: press the adhesive
tape on coating / painting surface apply tape to cuts, remove tape
after 2 min and examine for removal of coating from substrate.
Nil