Measurement Guide

REPORT NO.: 85122610712
Form Owner: THD QA - Issue Date: 6/23/08 - Version #: 4
Proprietary & Confidential Page 31 of 32
The Home Depot Company Information
Item
code
Details Defective Classification
Critical Major Minor
 Moisture content exceeds the standard

C Coating Adhesion Test on Coating / Painting Component (if
available)
· Removal of coating is equal or more than 15% after Cross
Hatching Test or / and
· Specimen falls down after Tape test.
Reject the shipment
Note 1: The above described defects are those most commonly found, but not necessarily cover all possible defects.
And the defective classification is for reference only. The final decision of the defective classification would
be decided by the inspector.
Note 2: The checking and defect finding evaluation should be conducted at a distance around 76 cm (when an adult
extends his hand forward, normally it is distance from eye to tip of middle finger), the time duration for one
position is around 3-5 seconds.
------ End of This Section -----