Instructions / Assembly

ManualsBrandsMartha Stewart Living ManualsArtificial Christmas Trees7.5 ft. Indoor Norwegian Spruce Hinged Artificial Christmas Tree

Assembly Instructions

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

• Do not use seasonal products outdoors unless

marked suitable for indoor and outdoor use. When

products are used in outdoor applications, connect

the product to a Ground Fault Circuit Interrupter

(GFCI) outlet. If one is not provided, contact a

qualified electrician for proper installation.

• This seasonal use product is not intended for

permanent installation or use.

• When decorating trees, use miniature light bulb

strings or LED light strings only. “C” size bulbs

are not recommended.

• Do not mount or place near gas or electric heaters,

fireplaces, candles or other similar sources of heat.

• Do not secure the wiring of the product with

staples or nails, or place on sharp hooks or nails.

• Unplug the product when leaving the house, when

retiring for the night, or if left unattended.

• CAUTION: This is an electrical product – not a toy!

To avoid risk of fire, burns, personal injury and

electric shock, it should not be played with or

placed where small children can reach it.

• Do not let lamps rest on the supply cord or any wire.

• Do not use this product for other than its intended

use.

• Do not hang ornaments or other objects from cord,

wire or light string.

• Do not close doors or windows on the product or

extension cords as this may damage the wire

insulation.

• Never operate this product if the power cord or

plug is damaged.

• Use only manufacturer specified replacement bulbs.

• Read and follow all instructions that are on the

product or provided with the product.

USE AND CARE INSTRUCTIONS

• When storing the product, carefully remove the

product from wherever it is placed, including trees,

branches, or bushes, to avoid any undue strain or

stress on the product conductors, connections, and

wires.

• When not in use, store neatly in a cool, dry location

protected from sunlight.

FOR INDOOR USE ONLY. Retain carton for storage purposes.

CONTENTS

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

re-Lit Hinged and Wrapped Trees . . . . . . . 2

Low-Voltage LED Lit Trees . . . . . . . . . . . . . 3

Shaping Instructions . . . . . . . . . . . . . . . . . . 4

Bulb Replacement . . . . . . . . . . . . . . . . . . . . 4

Fuse Replacement . . . . . . . . . . . . . . . . . . . 4

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Music Match

Bluetooth

Lights System . . . 4

SAVE THESE INSTRUCTIONS

Scan this with

your smart phone

to be directed to

assembly videos.

A Tree Assembly and Shaping Video is available online. Please visit

the Customer Service tab at www.nationaltree.com to view.

RETAIN FOR YOUR RECORDS:

Tree Style No. UPC Code

Store Where Purchased

Date Purchased Price

LIMITED WARRANTY FOR ARTIFICIAL CHRISTMAS TREES

New product registration can

only be completed online at

nationaltree.com/customer-service.html

Please read this warranty thoroughly and familiarize yourself with

its restrictions and requirements.

National Tree Company warrants its 6.5 ft. and taller trees against

manufacturer-only defects for a period of five (5) years from

the date of purchase indicated on your sales receipt. (White

Trees, one year).

Manufactured defective parts will be repaired or replaced.

The lights on Pre-Lit Trees are warranted for a period of two (2)

years from date of purchase; three (3) years for low voltage

LED trees (see below).

This Warranty does not apply to trees that are used as display

trees in the store. This tree is for indoor use only. Outdoor use of

this tree voids the warranty.

PRE-LIT TREES LIMITED WARRANTY

National Tree Company warrants the light sets on its Pre-Lit trees

against manufacturer-only defects in material or

workmanship for a period of two (2) years from date of

purchase; three (3) years for low voltage LED trees. Culpability

of Company is limited to replacement of defective light set only.

To have the Warranty placed into effect, completed online

registration of product is required with inclusion of sales

receipt noting purchase date and place. New product registration

can only be completed online at www.nationaltree.com.

Shipping Costs under PRE-LIT WARRANTY TERMS: Please

note the following terms regarding shipping of product for

warranty service:

1) National Tree Company will pay the cost of shipping (to our

facility and back to customer), under warranty terms, during the

first season of use. Receipt dated prior to December 25 of

purchase year constitutes first season of use. Please note that it

is the responsibility of the customer to obtain a box of the smallest

possible size and shape to securely contain the part being shipped.

2) After the second season of use, the customer will be

responsible for cost of delivery to our facility. National Tree

Company will pay the return cost delivery of parts repaired due

to manufacturing defect. Customer will be responsible for return

shipping cost of any parts repaired due to misuse or neglect.

3) All shipping costs to and from our facility for warranty service

after the third season of use will be the responsibility of the

customer.

REQUIREMENTS FOR WARRANTY SERVICE:

Customers are required to contact National Tree Company

for AUTHORIZATION OF RETURN prior to shipping product

for warranty service.

To receive authorization of return, email us at service@

nationaltree.com or call 1-888-494-PART (7278). Information

required will include: product item number, UPC bar code number,

name of store where purchased, a detailed description of the

problem, and your address and phone number.

At the discretion of National Tree Company, you may either

receive a replacement part or be instructed as to which part(s)

to ship prepaid to National Tree for our inspection and

determination and/or possible repair. Replacement or repair as

provided by this limited warranty is our exclusive remedy to the

consumer and does not place National Tree Company liable for

any incidental or consequential damages.

IMPORTANT NOTES:

Removing factory attached functioning or non-functioning light

strings from any section of your pre-lit tree will void the

warranty.

Please retain the product carton for storage purposes and/or for

use in the event of warranty service for product shipment.

Keep product away from heat and moisture. This limited warranty

does not cover damage resulting from accident, misuse, abuse,

negligence, or normal wear. In these instances, parts can be

purchased at a reasonable fee plus shipping charges.

CAUTION: IMPORTANT SAFETY INSTRUCTIONS

SAVE YOUR SALES RECEIPT. It will be

needed when requesting warranty service.

Summary of content (8 pages)

PAGE 1
Assembly Instructions FOR INdOOR USE ONlY. Retain carton for storage purposes. A Tree Assembly and Shaping Video is available online. Please visit the Customer Service tab at www.nationaltree.com to view. Scan this with your smart phone to be directed to assembly videos. SAVE THESE INSTRUCTIONS CONTENTS Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . Pre-Lit Hinged and Wrapped Trees . . . . . . . Low-Voltage LED Lit Trees . . . . . . . . . . . . . Shaping Instructions . . . . . . . . . .
PAGE 2
Assembly Instructions Each carton contains one top section, one bottom section (larger trees include one or more middle sections) and a metal or plastic tree stand. 1. If your tree has a metal stand, unfold it and insert the eye bolt. Remove packing material from ends of poles. Put bottom section pole into tree stand making sure it is seated properly (Figure 1). Tighten eye bolt.
PAGE 3
low Voltage lEd Trees SPECIAl NOTE ABOUT GIANT TREES Some of the larger trees in our product line will include more than one middle section. If your tree contains more than one middle section, note that each section will be numbered in ascending order. The tree bottom section (which inserts into tree stand) will be number 1. The next section as you build up, will be number 2. Section 3 will follow until assembly is completed by inserting tree top section. Fig.
PAGE 4
Bulb Replacement Instructions Memory Shape® Trees 1. Unplug light string from power source. 2. Pull up on the Bulb Lock unlatching the bulb from the bulb socket. Gently pull the bulb straight out (Figure 1). 3. Before inserting the new bulb into socket, make sure that the two wires on either side of the the bulb base are straight up and flush with the base (diagram at right). 4. Carefully insert new bulb into socket and push down Bulb Lock until it snaps into place (Figure 2).
PAGE 5
Instrucciones de Montaje PARA USO EN INTERIORES SOlAMENTE. Conserve la caja para guardar el árbol después de usarlo. El video de como ensamblar y dar forma al árbol esta disponible en internet. Visite nuestro servicio al cliente en: www.nationaltree.com. Escanear este código con su celular para dirigirse a al video de instrucción. CONSERVE ESTAS INSTRUCCIONES CONTENIdO Instrucciones de Montaje . . . . . . . . . . . . . . . . . . . . . . . . . . Árboles Abisagrados y Cableados Preiluminados . . . . . .
PAGE 6
Instrucciones de Montaje Cada caja contiene una sección superior, una sección inferior (los árboles más grandes incluyen una o más secciones intermedias) y una base de árbol de metal o de plástico. 1. Si su árbol tiene una base de metal, despliéguela e inserte la tornillo de ojo. Quite el material de embalaje de los extremos de los postes. Inserte el poste de la sección inferior en la base del árbol, y asegúrese de que esté bien asentada (Figura 1). Apriete la tornillo de pasador.
PAGE 7
Árboles con luces lEd de Bajo Voltaje NOTA ESPECIAl SOBRE ÁRBOlES GIGANTES Fig. 1 Algunos de los árboles más grandes de nuestra línea de productos incluirán más de una sección media. Si su árbol contiene más de una sección media, observe que cada sección estará numerada en orden ascendente. La sección inferior del árbol (que se inserta en la base) será la número 1. La sección siguiente, a medida que sigue armando el árbol, será el número 2.
PAGE 8
Instrucciones Para Remplazo de lámparas Arboles Memory Shape® 1. Desenchufe el cordón eléctrico de la fuente de energía. 2. Jale de la traba de bombillas (si se incluye) para soltar la bombilla del casquillo. Levante delicada-mente la bombilla hacia arriba (Figura 1). 3. Antes de insertar la nueva bombilla en el casquillao, asegúrese de que los dos cables a los lados de la base de la bombilla estén levantados y al ras con la base (diagrama de la derecha). 4.