Replacement Part List

7
5 Slide the upper handle frame into lower handle then
depress the small button at the end of the upper handle
frame, push and insert into lower handle until it snaps
securely into place (Figs. 4 – 5).
6. Connect the high-pressure hose to the water outlet on the
washer (Fig. 6).
7. Fit the spray wand into the trigger gun and rotate it until
the two parts are completely locked (Fig. 7).
8. Connect the high-pressure hose to the trigger gun
(Fig. 8).
Fig. 4
Upper
handle
frame
Lower
handle
Fig. 5
Upper
handle
frame
Lower
handle
Push
button
Fig. 6
High-pressure
water outlet
(REAR)
High-pressure hose
Fig. 7
Trigger gun
Spray wand
High-pressure hose
Trigger gun
Fig. 8