User Manual

© 2018 by Snow Joe
®
, LLC
Distributed exclusively by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
Model MTS-CBF1 Form No. SJ-MTS-CBF1-880E-M
COPPER BIRD FEEDER
OPERATOR’S MANUAL
1
This Copper Bird Feeder is a beautiful addition to your outdoor décor. The feeder also acts as a shelter
with a luxurious copper cover. The easy-to-clean feeder is equipped with four feeding ports and the
lipped feeding tray with drain holes prevents waste and keeps feed dry.
INSTRUCTIONS FOR USE + CARE:
FILLING: To ll bird feeder with seed, remove the ring handle by turning it counter clockwise.
With the ring handle removed, lift the copper cover o of the center screw.
Fill feeder tube with seed. Do not ll beyond the black rim at the top of the feeder tube.
Replace the copper cover onto the center screw and secure with the ring handle. Rell as needed.
CLEANING: Remove all seed and disassemble feeder before cleaning. Wash regularly with warm water and let
dry completely before relling.
If mold or debris has accumulated, mix nine parts water with one part bleach and clean thoroughly. Rinse well,
dry completely and rell with fresh seed.
COPPER CARE: To restore the brilliant nish to your copper feeder, polish well with a copper cleaner/varnish.
Seal copper with a clear lacquer to prevent additional wear.
If you have any questions or comments, please call the Snow Joe
®
+ Sun Joe
®
Customer Service department
at: 1-866-SNOWJOE (1-866-766-9563).
Ring handle
Copper cover
Center screw
Feeder tube
Seed tray
Black rim

Summary of content (8 pages)