User Manual

4
USING YOUR REFRIGERATOR
Setting the temperature control:
Initially set the cold control midway between the numbers
(between the #3 and #4).After at least 2 hours adjust to
the temperature that suits you. The higher the number you
select, the cooler the temperature. (See figure 3). The tem-
perature range of the refrigerator is from 33° to 52°F (1° to
11°C).
Cold control
underneath door
in grille
Tap Equipment
The assembly and cleaning instructions for the tap equip-
ment are in a separate owners guide which is included
in the box of tap equipment inside your beer dispenser.
Please retain both the Marvel beer dispenser manual and
the Micro Matic tap equipment manual for future refer-
ence. For service parts or questions concerning the tap
equipment please contact:
Micro Matic
866.291.5756
www.micromatic.com
Please note in regards to the CO2 cylinder. Place the
CO2 cylinder and regulator in the right hand corner of the
refrigerator. It must be in an upright position to operate
in an efficient manner. Secure the cylinder by looping the
provided chain around the cylinder valve and regulator.
CO2 can be dangerous. If it becomes difficult to
breathe and/or your head starts to ache, a high con-
centration of carbon dioxide may be present. Leave the
area immediately.
Figure 3
Figure 4
Drain Kit
If your keg dispenser is provided with a drain kit (part
number 42242374) this is cartoned separately and is
inside the refrigerator. Please refer to the instructions in-
cluded with the drain kit for installation.
Tap Cleaning Kit
This is an optional item (part number 42242373) Kit in-
cludes everything to quickly clean tap. Includes cleaning
solution, pump, mixing bottle, brush and wrench.