How to Install

9
MOUNTING
TRACK TO BOARD
Drill 1/4" dia pilot holes for track mounting lag
bolts into board at marked locations from
Step 7. (FIGURE 9)
10
ATTACHING TRACK
TO MOUNTING BOARD
Attach track to mounting board with 3-3/4" lag
bolts with spacers and washers using 13mm
wrench. (FIGURE 10)
Washers can be found on concrete bolts.
11
Slide stoppers on both ends of track
(note the stoppers are handed). Secure
with set screws using the allen wrench
that is included with stoppers.
12
HANGING DOOR AND
ADJUSTING STOPPERS
Place assembled door with roller onto track
and rotate anti-jump block. Slide door back
and forth to test how well the door covers
the opening. Reposition stoppers as needed.
(FIGURE 11)
If less travel of the door is required, the
stoppers can be moved inside end mounting
bolts. Remove the end mounting bolts and
spacers, slide the stopper to the new location
and reinstall bolt and spacer.
3/8” (9.5 mm),
1/2” (12.7 mm)
gap under the
door
Door height + 1 3/4”
Minimum 2”
(51 mm)
81” x 5-1/2” x 7/8”
78 3/4” (2000 mm)
Solid wood
blocking
Solid wood
blocking
3/8" (10 mm)
Drill depth
1 3/8"
(30 mm)
Solid wood
blocking
3/8” (9.5 mm),
1/2” (12.7 mm)
gap under the
door
Door height + 1 3/4”
Minimum 2”
(51 mm)
81” x 5-1/2” x 7/8”
78 3/4” (2000 mm)
Solid wood
blocking
Solid wood
blocking
3/8" (10 mm)
Drill depth
1 3/8"
(30 mm)
Solid wood
blocking
FIGURE 9. Drilling for track mounting lag bolts
FIGURE 10. Attaching track and installing stoppers
FIGURE 11. Hanging door and adjusting stoppers
1/4" dia
1/4" (8 mm)
Drill depth
1 3/16"
(30 mm)
Drill depth
1 3/16"
(30 mm)
1/8" (3 1/2 mm)
1/8" (4 mm)
Drill depth
1" (25.4 mm)
x2 Floor-mounted bottom guides
x4 #8 5/8" pan head philips screws
13mm
Wrench
5x
5/16" (8mm x 90mm)
Track Mount Lag Bolts
Barn Door Installation Guide
BARN DOOR HARDWARE STRAIGHT STRAP KIT
©2018 Masonite International Corporation. HMD-18600 1-800-663-DOOR masonite.com
HMD-18600-Barn Door Installation-Instructions-SS-P2.indd 5 11/28/18 11:09 AM