How to Install

FLOOR-MOUNTED DOOR

GUIDE INSTALLATION

Used for standard doors that are grooved

in the bottom of the panel for the guide.

With the door hanging straight, position the floor-

mount door guide inside groove in the bottom of the

door. Slide the door side to side to ensure the guide

is properly placed. Mark location of the guide.

Attached guide with supplied screws. If needed

supplied anchors can be used by drilling 1/4" dia

holes. (FIGURE 12)

To fasten guide the door may need to be removed or

slide out of the way by loosening one of the stoppers.

FINAL CHECK OF STOPPERS

AND ANTI-JUMP BLOCKS

Check to see that stoppers are properly located and

tightened in place. Also check to see that anti-jump

blocks are rotated correctly and tightened.

1/4" (8 mm)

Drill depth

1 3/16"

(30 mm)

Drill depth

1 3/16"

(30 mm)

1/8" (3 1/2 mm)

FIGURE 12. Attaching ﬂoor mounted door guide

IF NEEDED

1/8" (4 mm)

Drill depth

1" (25.4 mm)

x2 Floor-mounted bottom guides

x4 #8 5/8" pan head philips screws

FIGURE 13. Securing stoppers and anti-jump blocks

1/4" (8 mm)

Drill depth

1 3/16"

(30 mm)

Drill depth

1 3/16"

(30 mm)

1/8" (3 1/2 mm)

Barn Door Installation Guide

BARN DOOR HARDWARE STRAIGHT STRAP KIT

1-800-663-DOOR masonite.com

HMD-18600-Barn Door Installation-Instructions-SS-P2.indd 6 11/28/18 11:09 AM