Specifications

Masport In-built Fireplaces 17
MAINTENANCE
use and at least once a year thereafter or when
needed.
Maintenance of Gold-Plated Doors
The gold electroplated finish on the doors requires little
maintenance, and need only be cleaned with a damp
cloth. DO NOT use abrasive materials or chemical
cleaners, as they may harm the finish and void the
warranty.
Door Gasket
If the door gasket requires replacement, 7/8" diameter
material must be used. A proper high temperature
gasket adhesive is required. A gasket repair kit, Part #
846-570 is available from your local Masport dealer.
Door Latch Adjustment
The door latch may require adjustment as the door
gasket material compresses after a few fires. Removal
of the spacer washer, shown in the diagram below, will
allow the latch to be moved closer to the door frame,
causing a tighter seal. Remove and replace the nuts,
washer as shown.
Glass Cleaning
Only clean your glass window when it is cool. Your local
retailer can supply you with special glass cleaner if plain
water and a soft cloth does not remove all deposits.
Glass Replacement
Your Masport In-built Fireplace is supplied with 5 mm.
Neoceram ceramic glass that will withstand the highest
heat that your unit will produce. In the event that you
break your glass by impact - purchase your replacement
from an authorized Masport dealer only, and follow our
step-by-step instructions.
Glass Removal
Allow the stove to cool before removing or replacing
glass. Remove the door from the in-built fireplace and
remove the glass retainer. Use caution when removing
broken glass to prevent injury.
When placing the replacement glass in the door, make
sure that the glass gasketing will properly seal your unit.
Replace the retainer and tighten securely, but do not
spanner down on the glass as this may cause breakage.
Do not substitute materials. If your glass door does
break, do not continue to use your unit until it has been
replaced.