Specifications

Masport In-built Fireplaces

Installing Your In-built Fireplace

Your in-built fireplace is very heavy and will require two

or three people to move it into position. The in-built

fireplace can be made a little lighter by removing the cast

iron door by opening it and lifting it off its hinges. Be sure

to protect your hearth extension with a heavy blanket or

carpet scrap during the installation.

Convection Grills

The convection grills are installed before the unit is

positioned inside the fireplace.

Position the grill on the inside bodyface side and fasten

using the bolts, washers and nuts provided (2 per side)

as shown in the diagrams.

INSTALLATION

View from Rear

of In-built

Fireplace

Optional Flue Connector Kit

The optional Flue Connector Kit, Part # 846-527, may be

used to produce a secure connection between your flue

connector and the in-built fireplace collar. Detailed

installation instructions are included with the kit.

Note: The grill has a front and rear, the holes on the

front side have rounded edges and the rear

holes have flat edges.

Flue Connector Bracket

Package contains: 3 brackets and 6 screws.

These brackets are to be used to hold the flue liner

(not supplied) to the in-built fireplace and keep the

connection. The brackets are screwed into the top of

the in-built fireplace in the pre-punched holes and

then screwed into the flue liner.