Operator`s manual

26
Specifications
ENGINE
18 HP Kohler OHC
Model Kohler OHC Overhead Cam, TH18S
Horsepower 18 HP @ 3600 rpm
Cylinders 2
Bore 3.03 In. (77 mm)
Stroke 2.64 In. (67 mm)
Displacement 35 Cu. In. (574 cc)
Construction Cast Iron Sleeves,
Aluminum Crankcase
Electrical 12 Volt, 15 Amp Alternator Regulated Battery:
System 390 Cold Cranking Amps, 68 min. Reserve,
Industrial Rated Starter Motor
Ignition Solid-State Inductive Electronic Ignition
Governor Internal Flyweight with external Adjustment
Air Cleaner Dual Element
Lubrication Full Pressure Lube with Oil Filter
Oil Capacity 3.5 Pints (1.7 L) without Filter
4 Pints (1.9 L) with Filter
Fuel Tank Material: Non-Corrosive Polyethylene
Fuel Tank, Capacity: 3 Gallons (11.4 L)
Muffler Quiet Compact, Low Back Pressure
18 HP Kohler
Model Command OHV
Horsepower 18 HP @ 3600 rpm
Cylinders 2
Bore 3.03 In. (77 mm)
Stroke 2.64 In. (67 mm)
Displacement 38 Cu. In. (624 cc)
Construction Cast Iron Sleeves,
Aluminum Crankcase
Electrical 12 Volt, 15 Amp Alternator Regulated Battery:
System 296 Cold Cranking Amps, 60 min. Reserve
Capacity, Industrial Rated Starter Motor
Ignition Electronic Ignition
Governor Internal Flyweight with external Adjustment
Air Cleaner Dual Element
Lubrication Full Pressure Lube with Oil Filter
Oil Capacity 2 Quarts (1.9 L)
Fuel Tank Material: Non-Corrosive Polyethylene
Fuel Tank, Capacity: 3 Gallons (11.4 L)
Muffler Quiet Compact, Low Back Pressure
DIMENSIONS
Overall Length 70 In.(178 cm)
Overall Width 36.9 In. (94 cm)
Height To Top of Steering Wheel 39.7 In. (101 cm)
Wheel Base 50.7 In. (127 cm)
Weight (approx.)
w/o mower 689 lbs.
w/mower 956 lbs.
TRANSMISSION
Type Hydrostatic Pump & Motor Air Cooled W/Fan
Pump Variable Displacement Axial Type
Motor Fixed Displacement Reversible Axial Type
Hydraulic Fluid Simplicity Multi-Purpose Hydro Transmission Oil
Reservoir: 3 Qt. Capacity (2.8 L)
Filter: Cartridge w/25 Micron Rating
Full Flow w/o Anti-Drain Back
Control Spring Dampened Single Lever
Free Wheeling Valve for Manual
Tractor Movement
Speeds Forward: 0 - 7 MPH (0 - 11.3 km/h)
@3400 RPM Reverse: 0 - 4 MPH ( 0 - 6.4 km/h)
Differential Planetary Spur Gear, Controlled Traction Type
Final Drive Hardened Spur Gears
Rolling Contact Bearings
CONTROLS
Steering Full Circle Steering Wheel
4.14 to 1 Ratio, Gear and Sector
Clutch/Brake Location Right Front; Clutch is soft action, V-belt
Clutch, Brake is external band type
Location Implement Lift Lever: Left side (Hydraulic)
PTO Clutch Lever: Left side
Ground Speed Control Lever: Right Side
Ignition Key: On Dash
Light Switch: On Dash
Throttle Control: On Dash, Left Side
Choke Control: On Dash
Ammeter: On Dash
Parking Brake: Lower Right Side of Seat
CHASSIS
Frame Channel Electrically Welded Heavy Gauge Steel
Power Take-Off Points: Front , Center & Rear
Engine Mounting Above Front Axle
Pivot Point Location: double Pivoting Heavy Duty
Cast Front Axle
Rear Wheels Tire Size 23 x 10.5-12
Pneumatic Inflation Pressure 6-8 psi (41-55 kPa)
Front Wheels Tire Size 16 x 6.50-8
Pneumatic Inflation Pressure 12-15 psi
(82-103 kPa)
Accessibility Hood Tips Forward
Seat Type Bucket, High Back, Adjustable w/
Spring Suspension
Turning Radius Inside Rear Tire 32 In. (81 cm)
NOTE: Specifications are correct at time of printing and are subject to change without notice.