Use and Care Manual

OWNER’S/OPERATOR’S
MANUAL
07.0
16. MAINTENANCE
16- 17
CAUTION
Oil may be hot. Do not allow hot oil to come into contact with skin as
severe burns may result.
Engine Oil Level Inspection
1. Place vehicle on a level surface;
2, Start the engine and let it warm up
for a few minutes;
3, Turn off the engine.
NOTE:
Wait a few minutes until the oil settles
before inspecting the oil level.
4, Inspect: (Do not thread dipstick in)

Engine oil level
Oil level should be between maximum and minimum marks
―
2
‖
Oil level is below the minimum mark, Add oil up to the proper lever.
Engine Oil Replacement
1. Place vehicle on a level surface;
2. Run engine two or three minutes until warm, Stop engine;
3. Clean area around drain plug;
5. Place a drain pan beneath engine
crankcase.
6. Remove:

Oil filler plug

Drain plug


Compression spring


Oil strainer


O-ring
7. Allow oil to drain completely;
8. Install:

O-ring

, New

Compression spring


Oil strainer

,
New, if necessary