Use and Care Manual

OWNER’S/OPERATOR’S
MANUAL
07.0
16. MAINTENANCE
16- 18

Drain plug

,
and torque to 32N.m;
9. Use the funnel, Fill Crankcase with 1.4L engine oil, refer to
Recommended Engine Oil
;
10. Check the oil level. refer to
Engine Oil Level Inspection
;
11. Reinstall the Oil filler plug.
Transmission Lubrication
CAUTION
Be sure no foreign material enters the transmission case.
Transmission Oil Changing Procedure
1. Remove the four screws on the footwall and gently pull outward for
access.
2. Remove fill plug.
3. Remove transmission drain plug located on the bottom left hand
side and drain the oil. Catch and discard used oil properly.
4. Clean and reinstall the drain plug torque to 14 ft.lbs. (20Nm
）
5. Add the correct amount of SAE 80W/90GL5 Lubricant until oil
reaches the bottom of the filler hole
6. Check for leaks.
WHEELS AND TIRES
WARNING
Operating your UTV with worn tires, improperly inflated tires,
non-standard tires or improperly installed tire will affect vehicle handling
which could cause an accident resulting in serious injury or death.
Follow the safeguards listed below to prevent this type of situation.
Important Safeguards
Maintain proper tire pressure according to charts below. Improper tire
inflation may affect UTV maneuverability.