Use and Care Manual

T-Boss410 OWNER’S/OPERATOR’S MANUAL 18.0
16. MAINTENANCE
16- 20
Engine Oil Replacement
1. Place vehicle on a level surface;
2. Run engine two or three minutes
until warm, Stop engine;
3. Clean area around drain plug;
5. Place a drain pan beneath
engine crankcase.
6. Remove:
Oil filler plug
Drain plug 
Compression spring 
Oil strainer 
O-ring
7. Allow oil to drain completely;
8. Install:
 O-ring , New
Compression spring 
Oil strainer , New, if necessary
Drain plug , and torque to
32N.m;
9. Use the funnel, Fill Crankcase with 1.4L engine oil, refer to
Recommended Engine Oil;
10. Check the oil level. refer to Engine Oil Level Inspection;
11. Reinstall the Oil filler plug.