Use and Care Manual

T-Boss410 OWNER’S/OPERATOR’S MANUAL 18.0
16. MAINTENANCE
16- 22
Transmission Oil Changing Procedure
1. Remove the four screws on the footwall and gently pull outward for
access.
2. Remove fill plug.
3. Remove transmission drain plug located on the bottom left hand
side and drain the oil. Catch and discard used oil properly.
4. Clean and reinstall the drain plug torque to 14 ft.lbs. (20Nm）
5. Add the correct amount of SAE 80W/90GL5 Lubricant until oil
reaches the bottom of the filler hole
6. Check for leaks.
7. Reinstall footwall and screws removed in step 1.