Use and Care Manual

T-Boss410 OWNER’S/OPERATOR’S MANUAL 18.0

16. MAINTENANCE

16- 25

3. Remove the fill plug and add 9.8 ounces (290ml) of SAE GL-4

85W/90 Weight Gear Lubricant and inspect oil level. Oil level should

be kept even with the center of the drill point (approximately below

the top of the fill hole).

4. Reinstall the fill plug. Tight securely (18.4 ft. lbs/25N.m).

5. Check for leaks.

WHEELS AND TIRES

WARNING

Operating your UTV with worn tires, improperly inflated tires,

non-standard tires or improperly installed tire will affect vehicle handling

which could cause an accident resulting in serious injury or death.

Follow the safeguards listed below to prevent this type of situation.

Important Safeguards

Maintain proper tire pressure according to charts below. Improper tire

inflation may affect UTV maneuverability.

Do not use improper tires. The use of non-standard size or type tires

may affect UTV handling.

Make certain the wheels are installed properly. If wheels are improperly

installed it could affect vehicle handling and tire wear.

Tire Pressure

front

rear

see detail on the mark of sidewall