Use and Care Manual

T-Boss410 OWNER’S/OPERATOR’S MANUAL 18.0
16. MAINTENANCE
16- 26
Wheel Removal Procedure
1. Stop the engine, place the transmission in gear and lock the parking
brake.
2. Loosen the wheel nuts slightly.
3. Elevate the side of the vehicle by placing a suitable stand under the
footrest frame.
4. Remove the wheel nuts and remove the wheel.
Wheel Installation
1. With the transmission in gear and the parking brake locked, place th
wheel in the correct position on the wheel hub. Be sure the valve stem
is toward the outside and totation arrows on the tire point toward
forward rotation.
2. Attach the wheel nuts and finger
tighten them.
3. Lower the vehicle to the ground.
4. Securely tighten the wheel nuts
according to the chart found in “16.MAINTENANCE/ Wheel Nut
Torque”.
Tire Inspection
When replacing a tire always use original equipment size and type.
Tire Tread Depth
Always replace tires when tread depth is worn
to 1/8” (3mm) (1) or less. Please refer to your
Owner’s Manual for tire specifications.
LIGHTS
WARNING
Keep your headlights and taillights clean. Poor light while riding can
result in an accident causing severe injury or death.