Use and Care Manual

T-Boss410 OWNER’S/OPERATOR’S MANUAL 18.0
17. TROUBLESHOOTING
17-1
ISSUES OF IMPROPER OPERATION DRIVEN CLUTCH (CVT)
BURNING
Possible Causes
Solutions
Loading the UTV into a
pickup or tall trailer when in
high range.
Shift transmission to Low Range during
loading of the UTV to prevent belt burning
Loading the UTV into a
pickup or tall trailer.
Never operate UTV on hills steeper than
15％
Starting out going up a
steep incline
When starting out on an incline, use low
range.
Driving at low RPM or low
ground speed (at
approximately 3-7MPH/
5-12km/h）
Drive at higher speed or use low range. The
use of low range is highly recommended for
cooler CVT operating temperatures and longer
component life
Insufficient warm-up of
UTV’s exposed to low
ambient temperatures.
Warm engine at least 5 min., they with
transmission in neutral, advance throttle to
approx. 1/8throttle in short bursts, 5 to 7 times.
The belt will become more flexible and prevent
belt burning.
Slow and easy clutch
engagement.
Fast, effective use of the throttle for efficient
engagement.
Towing /Pushing at low
RPM/low ground aped.
Use Low Range only.
Stuck in mud or snow.
Shift the transmission to Low Range carefully
use fast, aggressive throttle application to
engage clutch. WARNING: Excessive throttle
may cause loss of control and vehicle
overturn.
Climbing over large objects
from a stopped position
Shift the transmission to Low Range carefully
use fast, brief, aggressive throttle application
to engage clutch. WARNING: Excessive
throttle may cause loss of control and vehicle
overturn.