Use and Care Manual

T-Boss410 OWNER’S/OPERATOR’S MANUAL 18.0
7. CONTROL AND PARTS FUNCTIONS
7- 1
ELECTRICAL SWITCHES
Switch On Panel
1, Main Switch 2, Turn signal lamp switch
3, Light switch 4, Emergency alarm switch
5, Accessory Socket 6, Switch “2WD”/“4WD”
7,Tractor Switch 8,Override switch 9, Horn Switch
10, Safety Belt Lamp
1, Main Switch
Functions of the respective switch positions are as follows:
ON: All electrical circuits are supplied with power.
OFF: All electrical circuits are switched off. The key can be
removed in this position.
START: The electric starter is engaged by turning and holding the
key in this position. Release the key when the engine starts.
CAUTION
Do not operate the electric starter continuously for more than 5
seconds, otherwise starter damage could occur. Wait at least 5
seconds between each operation of the electric starter to let it cool.
Do not turn the key to the “START” position with the engine running,
otherwise damage to the electric starter can result.
2、Turn signal lamp switch
3、Light Switch:Turn on the headlight.
WARNING