Use and Care Manual

T-Boss410 OWNER’S/OPERATOR’S MANUAL 18.0
7. CONTROL AND PARTS FUNCTIONS
7- 3
disengaged/ engaged when riding on a hard surface or riding in
reverse.
CAUTION
Do not switch on 4WD if the rear wheels are spining. This may
cause severe machine damage. When switch on 4WD, the button
will stay in 4WD position, but 4WD mechanics maybe still
disengaged. Always apply throttle gently and let the wheels move
slightly to allow the 4WD mechanics finally engage. The 4WD
indicator on the speedometer will come on when 4WD is engaged.
7、Tractor Switch
8、Override Switch
Some version of this vehicle is equipped with a reverse speed limiter
system. To obtain additional power while backing up, depress the
override button.
9,、Horn Switch
10, Safety Belt Lamp
When the key is turned on, the bulb lights up and goes off about 12
seconds later.