Use and Care Manual

T-Boss550 OWNER’S/OPERATOR’S MANUAL 18.0

16. MAINTENANCE

16- 20

WHEELS AND TIRES

WARNING

Operating your UTV with worn tires, improperly inflated tires,

non-standard tires or improperly installed tire will affect vehicle handling

which could cause an accident resulting in serious injury or death.

Follow the safeguards listed below to prevent this type of situation.

Important Safeguards

Maintain proper tire pressure according to charts below. Improper tire

inflation may affect UTV maneuverability.

Do not use improper tires. The use of non-standard size or type tires

may affect UTV handling.

Make certain the wheels are installed properly. If wheels are improperly

installed it could affect vehicle handling and tire wear.

Tire Pressure

front

rear

see detail on the mark of sidewall

Wheel Removal Procedure

1. Stop the engine, place the transmission in gear and lock the parking

brake.

2. Loosen the wheel nuts slightly.

3. Elevate the side of the vehicle by placing a suitable stand under the

footrest frame.

4. Remove the wheel nuts and remove the wheel.

Wheel Installation

1. With the transmission in gear and the parking brake locked, place th

wheel in the correct position on the wheel hub. Be sure the valve stem

is toward the outside and totation arrows on the tire point toward

forward rotation.

2. Attach the wheel nuts and finger

tighten them.

3. Lower the vehicle to the ground.