Use and Care Manual

T-Boss550 OWNER’S/OPERATOR’S MANUAL 18.0
16. MAINTENANCE
16- 22
the bulb. Install rebound clip just removed to fasten the bulb and
then plug in wires.
3. Remove position lamp socket out of top cover. Remove the worn
bulb by taking a hold of it and pulling it out. Insert a new bulb into
socket before inserting the socket in its mounting hole.
Taillight / Brake light Lamp Replacement
If the Taillight / Brake light does not work the lamp may need to be
replaced.
1. Remove the Side
Cover A ①.
2. Remove the Side
Cover B ②.
3.Remove the Nut ①.
4.Take off the Taillight / Brake Light.
5.Remove bulb and replace it with
recommended bulb.
6.Test the Taillight/ Brake Light to see
that it’s working .
7.Re-install the Light and Nuts.
CLEANING YOUR UTV
Keeping your UTV clean will extend the life of various components.
Washing
Never use a high pressure type car wash system, it can damage to the
wheel bearings, transmission seals, body panels, brakes and warning
labels, and water might enter the engine or exhaust system.
The best and safest way to clean your UTV is with a garden hose and a