Use and Care Manual

T-Boss550 OWNER’S/OPERATOR’S MANUAL 18.0
16. MAINTENANCE
16- 14
Checking the brake fluid level
Insufficient brake fluid may let air enter
the brake system, possibly causing the
brakes to become ineffective. Before
riding, check that the brake fluid is above
the minimum level mark and replenish if
necessary. A low brake fluid level may
indicate worn brake pads and/or brake
system leakage. If the brake fluid level is
low, be sure
to check the brake pads for wear and the
brake system for leakage.
The brake fluid reservoir is located under the hood.
 When checking the fluid level, make sure the top of the brake fluid
reservoir is level.
 Use only the recommended quality brake fluid. Otherwise, the
rubber seals may deteriorate, causing leakage and poor braking
performance.
Recommended brake fluid: DOT 3
 Refill with the same type of brake fluid. Mixing fluids may result in a
harmful chemical reaction and lead to poor braking performance.
 Be careful that water does not enter the brake fluid reservoir when
refilling. Water will significantly lower the boiling point of the fluid
and may result in vapor lock.
 Brake fluid may deteriorate painted surfaces or plastic parts. Always
clean up spilled fluid immediately.
 Have an authorized dealer inspect the brake system if the brake
fluid level goes down.
Brake pedal and accelerator pedal lubrication
Lubricate the pivoting parts.
Recommended lubricant:
Lithium-soap-based
grease (all-purpose
grease)