Instructions

17
CV table
CVs may be used with Loco Address (L), switch address (S) or both (LS)
CV Description D L/W Range Note
1 Loco address (standard short) 3 L 1-127
5+6 Register mode programming
Reg 6 = CV Number
Reg 5 = CV Value
--- --- --- CV 5 and CV 6 are not effected
7 Software Version --- --- ---
8 Manufacturer ID 123 --- ---
8 Decoder reset functions (refer to Attachment 2)
(3 ranges available) --- ---
11
16
22
basic settings
programming lock
function settings
15 Programming lock 242 0...255 active if CV 15 ≠ CV 16
16 Programming lock 242 0...255 standard value
17 Long loco address (high byte)
128 L
128...
10239
long loco address is active,
when CV 29 Bit 5 = 1.
18 Long loco address (low byte)
29 NMRAconguration 128 LS bitwise programming
Bit Value OFF (Value 0) ON
Bit 1 2 14 speed steps 28 speed steps (automatic)
Bit 5 32 short address (CV 1) long address (CV 17/18)
Bit 7 128 Loco address switch address
31 Switch address SW1 high 0 S
1 .. 2048
32 Switch address SW1 low 1 S
41 A1 Command Allocation 1 L
0...16
0 = Light
1..16 = Function
42 A2 Command Allocation 2 L
50 Switching direction 0 LS 0 / 1 0 = normal; 1 = invers
51 A1 Special Function 67 LS
see attachment 1
52 A2 Special Function 67 LS
61 K1 Command 1 S 0=deactivated; 1=switch on; 2=switch off
(only for special function)
62 K2 Command 1 S