Instructions

7
2.4 Kontakteingänge K1/K2
Auf der Unterseite des Schalt-
decoders benden sich die
Kontakteingänge K1/K2 (Abbildung
3). Diese können zum manuellen
Schalten des Schaltausgangs
SW1 (z. B. Schalten einer Weiche
über einen Gleiskontakt oder
Schalter) verwendet werden.
Im Auslieferungszustand sind
beide Kontakteingänge aktiv. Beim
Anschluß unseres Gleiskontakts an
die Kontakteingänge müssen Sie
auf die Polung achten!
2.4 Contact Inputs K1/K2
The switch decoder offers two
contact inputs (K1/K2) on the
bottom side (illustration #3). They
may be used to trigger the switch-
ing output SW1 externally (for
example with track contacts). Both
contacts are activated per factory
default. When connecting our track
contact on the contact inputs, you
must pay attention to the polarity!
K1
K2
IN1
GND
GND
IN2
Abbildung 3: Kontakteingänge des Schaltdecoders
Illustration #3: Contact inputs of the switch decoder