Use and Care Guide

Lowes.com/masterforge

ASSEMBLY INSTRUCTIONS

WARNING: The grill should be assembled and placed on a at, level suface.

Compare the parts and hardware with the list and diagrams. Do not attempt assembly if

any part is missing or damaged.

1. Attach the locking casters (Q) and the

casters (R) to the bottom panel (P)

using 12 screws (AA). When this process

is completed, turn the bottom panel over.

The two locking casters (Q) should be

at the back of the grill.

2. Align the holes in the rear panel (L)

with the holes in the bottom panel (P)

and insert screws (AA) into the aligned

holes.

Note: Do not tighten the screws

completely. Leave at least one full turn

on each. After all the screws have been

installed, go back and tighten them fully.

Hardware Used

3/16-24 x 1/2 in.

Screw

x 12

3/16-24 x 1/2 in.

Screw

x 3