User manual

Masterclock www.masterclock.com

[SET TIME/DATE] BUTTON

Here you may break the link to UTC time to create a custom

time. Click this button to reveal a preliminary warning. Read the

warning and continue if you wish to create a custom time for

your CLDNTD12 clock by unclicking the [UTC] button. By clicking

the [UTC] button you will return to UTC time.

[STATUS] BUTTON

The “Status” window includes a “Display snapshot” of the

clock’s face. On the right are constantly updated listings of the

UTC Time, Local Time, Current Reference, Reference Status, Last

Time Lock Lost (UTC) and Last Time Lock Restored (UTC). Below

is a NTP tab. The first lists the name and model number of the

unit followed by the network configuration numbers. These

would echo the “Network Configuration” window figures (page

13). The tab lists whether or not the server and/or client are

enabled and various stats about each.

[RESET DEVICE] BUTTON

This button brings up the “Are you sure?” window. Press the

[Yes] button and you will “soft reset” your clock to allow the

device to clear its current communications buffer and re-

initialize its processing, which includes re-requesting of a DHCP

address. This feature is intended to allow the user to remotely

reset the unit and does not restore the factory default state.

[FORGET MEMORIZED PASSWORD] BUTTON

Click this (if present) and the memorized password will be

forgotten. There is no window associated with this button. The

password reverts to the factory default password: “public”.

Practical use of this feature requires the

clock to be removed from the time code

source.

When the clock has access to a valid time

code source, information obtained via time

code will immediately overwrite any

manually established time/date.