User manual

Masterclock www.masterclock.com
33
Health and Safety
These devices generate, use and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
There is no guarantee that interference will not occur in a particular installation. If this device
does cause harmful interference to radio or television reception, which can be determined by
removing power from the device, the user is encouraged to try to correct the interference by one
or more of the following measures:
1. Connect the devices DC power cord into an outlet
on a different circuit than other devices.
2. Increase the physical distance between the
CLDNTD12 digital time display and other devices.
3. Contact MASTERCLOCK.
This CLDNTD12 has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
Only qualified persons are authorized to carry out
maintenance on this device. Read this User’s Manual
carefully, and follow the correct procedure when
setting up the device. Do not open your Masterclock
product or attempt to disassemble or modify it.
COPYRIGHT
©All rights reserved. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or
otherwise, without the prior written consent of Masterclock.
TRADEMARKS
Microsoft is a registered trademark of Microsoft Corporation. Other trademarks mentioned in this
manual are the property of their respective owners.
PRINTING
While optimized for onscreen viewing, the pages of this manual are formatted for printing on 8.5”
x 11” and A4 sized paper, giving you the option to print the entire manual or just a specific page or
section.
Never insert any metallic object into
the devices case. Doing so increases
the risk of electrical shock, short
circuiting, fire or personal injury.
Never expose this device to rain, or use
it near water or in damp or wet
conditions.
Never place objects containing liquids
on or near this device, as they may spill
into its openings increasing the risk of
electrical shock, short circuiting, fire or
personal injury