SL ID E O FF BATTERY CHARGER 252-8026 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference. For questions / comments, technical assistance or repair parts – Please Call Toll Free: 1-866-917-4374. (M-F 8:30am-5:00pm Est.
TABLE OF CONTENTS Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Overview/Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY SYMBOLS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
SAFETy INSTRUCTIONS FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
SAFETy INSTRUCTIONS WARNING: Read warnings and instructions! all safety Failure to follow the warnings and instructions may result in electric shock, fire and / or serious injury. Save all warnings and instructions for future reference. WARNING: Risk of fire and electric shock. Dry location use only. Do not expose to rain. Risk of injury. GENERAL SAFETy RULES WARNING: Read all safety warnings and instructions.
OVERVIEW SL ID E O FF Electrical contacts LED lights Air vents SPECIFICATIONS Charger Input Charging Time For Batteries 120V~ 60Hz 150W 20 minutes 20V 1.5Ah Li-Ion (252-8029) 20 minutes 20V 2.0Ah Li-Ion (252-8031) 25 minutes 20V 2.5Ah Li-Ion (252-8030) 35 minutes 20V 4.0Ah Li-Ion (252-8034) 50 minutes 20V 5.0Ah Li-Ion (252-8035) 75 minutes 20V 7.5Ah Li-Ion (252-8027) Charger Weight 1lb. 11oz.(0.
ASSEMBLY WARNING: If any part is broken or missing, DO NOT attempt to plug in the power cord, attach the battery, or operate the tool until the broken or missing part is replaced. Failure to do so could result in possible serious injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury.
OPERATION HOW TO CHARGE THE BATTERY PACK WITH THE CHARGER(FIG. 1) FIG. 1 Do not , and burns. explosion above Risk of fire,ble, crush, heat . Keep disassem Use or incinerate of children. 252-8025, 100°C (212°F) of reach ® Works battery outMasterforce chargers 252-8044. only with 252-8036, 252-8037,18V and 20V. ER Tools, (7.5 Ah 150Wh) 252-8026, 20V with all FLEXPOW 252-8027 Model #: BATTERY Made in China. Service: Customer 4374 1-866-917- by Menards, Distributed WI 54703 Eau Claire, Inc.
OPERATION CHARGING A HOT BATTERY PACK If the battery pack is above the normal temperature range, the red LED will illuminate and the green LED will be off. When the battery pack cools down to approximately 95°F (35°C), the charger will automatically begin charging. CHARGING A COLD BATTERY PACK If the battery pack is below the normal temperature range, the red LED will illuminate and the green LED will be off.
MAINTENANCE WARNING: To avoid serious personal injury, always disconnect the plug from the power source when cleaning or performing any maintenance. Contact a qualified service technician for ALL repairs. WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by a qualified service technician WARNING: Avoid using solvents when cleaning plastic parts.
NOTES Page 11 17 Page
NOTES Page 17 Page 12
NOTES 17 Page 13
20V LITHIUM-ION CHARGER WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCE® brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2019 Menard, Inc.
