How to Guide

Table Of Contents

fix it to the building structure.

expansion bolt or self tapping screw and

4) Place ring of safety wire through the

3) Tighten the safety wire clamp.

STEP 3

Safety Wire Clamp

5) Connect the wire connector plugs

correctly. The wire connector plugs design

with fool proof device, please don’t force to

plug. Otherwise it may affect the normal use

of the light fan or burn the fan motor.

1) Raise the fan and place the hanger ball onto mounting bracket.

2) Rotate the fan until the notch on hanger ball snapped into the slot on mounting bracket and sits

firmly.

NOTE : THE DOWNROD AND HANGER BALL SHOULD NOT ROTATE IF THIS STEP IS DONECORRECTLY.

Fan

Controller

INSTALLATION INSTRUCTION