Marine Battery User Manual

4-2-10. AC Frequency：Selected by “S4” Dip Switch

Frequency S4

50 HZ OFF

60 HZ ON

4-2-11. Status：Display Power & Fault Status

Green LED LED Signal Status

Solid Power OK

Slow Blink Power Saving

Red LED LED Signal Status

Fast Blink OVP

Slow Blink UVP

Intermittent Blink

     

OTP

Solid OLP

4-2-12. Power Saving Mode: Power Saving Mode is adjustable and

set by the Dip Switches, S1, S2 and S3 on the front panel.

Example: The load should be set above15W. If the load is below15W,

the power saving mode will be activated.