Owner`s manual

CHAPTER 2: Using Manager Preference
2.1 USING MANAGER PREFERENCE MODE
Your MATRIX Cycle is designed to allow you to customize settings for your
preferences and diagnostics. The Manager Mode can only be accessed
while the Cycle is powered up. Follow the instructions to adjust the Cycle
computer for your desired setting.
STEP 1: Power up the Cycle and hold the UP and DOWN arrow keys for
3 seconds. The word ‘Manager’ will appear in the alphanumeric
window and will enter into the Manager setting automatically
after 3 seconds. Continue to pedal until finished.
STEP 2: Select information you would like to view or change from the
following list by using the
UP or DOWN arrows. Press SELECT.
Manager mode will allow you to view and set the following.
STEP 3: Use UP or DOWN arrows to increase or decrease values.
STEP 4: Press START to save and enter selected values and exit to STEP 2.
STEP 5: Exit by pressing START. Screen will reset to Start up.
DISPLAY
Manager
CODE: INFORMATION
P0: Maximum program time
P1: Default time
P2: Default level
P3: Default weight
P4: Speed
P5: Machine
P6: Cardio Entertainment
P7: Accumulated Distance
P8: Accumulated Time
P9: Software Version
DEFAULT VALUE
95 min
20 min
L1
150 lbs
Miles
BI
On
On
MIN.
5
5
L1
80lbs
Miles
BI
On
On
MAX.
95
95
L20
400lbs
KM
RE,EL
OFF
OFF
USER DEFINABLE
Y
Y
Y
Y
Y
Y
Y
Y
2.2 USING CSAFE
Matrix is the leader in entertainment availability. On the back of the console
are two RJ45 receptacles. They are marked CSAFE and ENTERTAINMENT.
Use the CSAFE port to plug in a CSAFE device using an RJ45 connector.
The connection is as follows:
CPU
UNIT 1
CSAFE
UNIT 2
ENTERTAINMENT
2
2.3 CONSOLE (BACK SIDE) ACCESS LAYOUT:
CSA FE
ENT ERTAI NMENT
REP RO GRA MM ING
CON NE CTO R
BATTERY
LOC AT IO N
CSA FE
PORT
ENT ERTAINM EN T
PORT
Below is a layout to all of the access ports on the back of your Matrix Console.
06'_Cycle's_M.indd 6 7/18/06 1:04:54 PM