Specifications

46
9.9 MOTOR REPLACEMENT
1) Turn off power to the treadmill and disconnect the power cord.
2) Remove the motor cover as outlined in Section 9.1.
3) Use a hook or length of wire to release the drive belt tensioner spring (Figure A).
4) With the spring released, rotate the tensioner to relieve tension on the drive belt (Figure B).
5) With the tension on the belt released, walk the drive belt off of the motor pulley (Figure C).
6) Disconnect the motor cables from the MCB and cut any tie straps holding them in place (Figure D).
FIGURE A
FIGURE B
FIGURE C
FIGURE D
CHAPTER 9: PART REPLACEMENT GUIDE