User guide

Matrox Avio Series – User Guide 19
Audio
Notes
 An Avio F120 transmitter requires an Avio F120 receiver.
 Your Matrox product is 100% VGA compatible and supports all VESA® standards: VBE
3.0 (Super VGA modes), DPMS (energy saving), DDC-2B (Plug-and-Play monitor), and
DDC-CI.
 The display resolutions and refresh rates available depend on your graphics hardware,
display driver, software monitor settings, and monitor. For information on the
capabilities of your monitor, see your monitor documentation.
 Your transmitter and receiver units use the same multi-display configuration and
monitor settings (such as display resolution and refresh rate).
External power supply
Input AC voltage range 100 to 240 V AC
Input frequency 50-60 Hz
Input connector IEC 60320-C14
Output voltage +12 V DC
Output connector DIN 4 male (4-pin) with lock
Maximum power consumption 30 W
Stereo audio 2 channel
Bits per sample 24 bits per channel, 2 channel (Left and Right)
Sampling rate 96 kHz
Audio connector type 3.5 mm stereo audio jacks
Stereo crosstalk -80 dB
Full-scale voltage 1 V
RMS
(2.83 V
P-P
)
Minimum impedance 10k Ohms
Total Harmonic distortion and Noise
(THD+N)
< -80 dB
Signal-to-noise ratio (SNR) >76 dBA