Datasheet

1 of 7
GENERAL DESCRIPTION
The DS1100L is a 3.3V version of the DS1100. It
is characterized for operation over the range 3.0V
to 3.6V. The DS1100L series delay lines have
five equally spaced taps providing delays from
4ns to 500ns. These devices are offered in
surface-mount packages to save PCB area. Low
cost and superior reliability over hybrid
technology is achieved by the combination of a
100% silicon delay line and industry-standard
µMAX and SO packaging. The DS1100L 5-tap
silicon delay line reproduces the input-logic state
at the output after a fixed delay as specified by
the extension of the part number after the dash.
The DS1100L is designed to reproduce both
leading and trailing edges with equal precision.
Each tap is capable of driving up to 10 74LS
loads.
Maxim can customize standard products to meet
special needs.
FEATURES
 All-Silicon Timing Circuit
 Five Taps Equally Spaced
 Delays are Stable and Precise
 Both Leading- and Trailing-Edge Accuracy
 3.3V Version of the DS1100
 Low-Power CMOS
 TTL-/CMOS-Compatible
 Vapor-Phase and IR Solderable
 Custom Delays Available
 Fast-Turn Prototypes
 Delays Specified Over Both Commercial and
Industrial Temperature Ranges
PIN ASSIGNMENT
PIN DESCRIPTION
TAP 1 to TAP 5 - TAP Output Number
V
CC
- +3.3V
GND - Ground
IN - Input
DS1100L
3.3V 5-Tap Economy Timing
Element (Delay Line)
1
2
3
4
8
7
6
5
V
CC
TAP 1
TAP 3
TAP 5
IN
TAP 2
TAP 4
GND
DS1100LZ SO (150 mils)
DS1100LU µMAX®
19-5736; Rev 10/11
µ MAX is a registered trademark of Maxim Integrated Products, Inc.