—~ .
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation T 5 (A)Bracket (B) Canopy (C) Chain (D)Body (E)Cage Locate all hardware & components before discarding packaging Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. 1.) Step. 1: Remove mounting bracket(A) from fixture and install to electrical boz. 2.) +
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation (F)Part (G)Screw (H)Nut (I) Bulb Locate all hardware & components before discarding packaging Step. 4: Attach appropriate amount of chain to loop to achieve desired mounting height. Thread wire through every 3rd loop of chain. —1I O (Neutral (L) positive 5.) & (green wire) Step. 5: Wire fixture to wires in outlet —E box. Remove ring from loop and slide down chain.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation Locate all hardware & components before discarding packaging —TT——A 6.) B Step. 6: Pull canopy through screw ring up —FC chain to ceiling and tighten securely. Step. 7:Install the bulb. Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.