TABLE OF CONTENTS TECHNICAL SPECIFICATIONS SAFETY INSTRUCTIONS KEY PARTS DIAGRAM OPERATING INSTRUCTIONS MAINTENANCE WARRANTY WARNING! For use with the compatible Maximum® batteries only. SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions.
TM TECHNICAL SPECIFICATIONS The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. CHARGER INPUT OUTPUT CHARGING TIMES WORK AREA COMPATIBLE MAXIMUM® BATTERIES OPTIMUM CHARGING TEMPERATURE WEIGHT 100–240V AC, 50/60HZ, 110W 12–20V DC, 4 A 12V max* (1.5Ah) Li-ion: 25minutes 20V max* (2.0Ah) Li-ion (054-3203-2): 35minutes 20V max* (4.0Ah) Li-ion (054-3206-6): 65minutes • Keep the work area clean and well lit.
• Prevent unintentional starting. Ensure that the switch is in the off- position before connecting to a power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or SAFETY INSTRUCTIONS energizing power tools that have the switch on invites accidents. • Remove any adjusting key or wrench before turning the power tool on. A TM another battery pack. • Do not overreach. Keep proper footing and balance at all times.
SAFETY INSTRUCTIONS • 9 TM Make sure that the cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts, or otherwise subjected to damage or stress. This will reduce the risk of accidental falls, which could cause injury and damage to the cord, which could then result in electric shock. • Keep the cord and charger away from heat to prevent damage to the housing or internal parts. • Do not allow gasoline, oils, petroleum-based products, etc.
TM Before attempting to use the charger, familiarize yourself with all of its operating features and safety requirements. CHARGER DIAGNOSTICS BATTERY CHARGING • When the charger detects a battery pack that is overheated, all three charging lights will blink at the same time. Please remove the battery and allow it to cool down for 15–30 minutes and re-insert. • When the charger detects a malfunction in the battery, two charging lights will blink at the same time.
GENERAL MAINTENANCE 3-YEAR BATTERY/CHARGER REPAIR WARRANTY Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. Maximum Canada will repair or replace the batteries/chargers which have worn beyond reasonable use due to normal use of such items, for a period of three (3) years from the date of original purchase.