Use and Care Guide

Step 1 (Fig. 1)

Rotate the lampshade counterclockwise to loosen and remove from the

base.

Step 2 (Fig. 2)

Insert the screws into the junction box about 0.2” deep. Connect the black

and white wires from the junction box to the same color wires from the

ﬁxture with two wire nuts. Connect the ground wire from ﬁxture to the

ground wire from junction box with the other wire nut. Tuck the wires into

the junction box.

Step 3 (Fig. 3)

Insert the ﬁxture plate through the

two screws. Rotate ﬁxture plate

clockwise to move the screws to

the small holes and tighten the

two screws with a screwdriver.

Step 4 (Fig. 4)

Reattach lampshade to base by

rotating the lampshade clockwise

unit it is ﬁrmly closed.

Fig. 1

Fig. 3 Fig. 4

Fig. 2

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any

part is missing or damaged, do not attempt to assemble the product.

Estimated assembly time: 10 minutes

Tools required for assembly (not included): Phillips screwdriver, gloves, ladder, and a pair of safety glasses

PREPARATION

INSTALLATION