User`s manual

4Ch H.264 hardware codec

- Network DVR

1) HDD

3-2. Detailed Installation

1. Connect Main Board and HDD using SATA data cable and HDD power cable.

2. Stick the HDD absorber (included in package) on the bottom of case and then install the

HDD on top of them by using the bolts (included in package).

3. Screws must be inserted from outside of the case bottom.

CHAP. 3 Installation

2) Camera

Connect camera to the camera input on rear panel of DVR marked CAMERA IN.

MAIN BOARD

(

HDD

)

Created with novaPDF Printer (www.novaPDF.com). Please register to remove this message.