User`s manual

ManualsBrandsMaxtor ManualsDVR4 Channel Stand-alone DVMR

4Ch H.264 hardware codec

- Network DVR

4-1. System Log-In

4-2. Factory Default

1. HDD Management

DISPLAY SETUP

RECORD

CONFIGURATION

EXTERNAL DEVICE

BACK-UP

FIRMWARE UPGRADE

FACTORY DEFAULT

LANGUAGE

DVR LOG-IN

USER ID ADMIN

USER PW ________

1 2 3 4 5 6 7 8 9

ENTER EXIT

CHAP. 4 Operation

1) After power on, right-click of a mouse shows

icon bar on the screen. Then you click the

[Menu] icon to log in.

2) Then, you will see ¡DVR Log-In¡ message

shown as right.

3) You may log in as a ADMIN, MANAGER, or

USER1 ~ USER8.

4) Input your password (Max. 8 digits are

available for password)

5) To exit, click ¡EXIT¡ button.

If the password entered matches previously set password, you can log into ¡MAIN MENU¡. If

an incorrect password is entered, you will see ¡PW IS NOT CORRECT¡ message on display.

The factory default password is none. Just click ¡ENTER¡ for first time initial log in.

-Factory default password

ADMIN : (Blank)

MANAGER : ¡1¡

USER1~USER8 : ¡2¡~¡9¡

※ For security reasons, be sure to make note of your own password.

Before first operation, you must check out each channel is displaying properly and log in

¡Main Menu¡ and set Time/Date and set HDD clear.

HDD MANAGEMENT

CAMERA SETUP

MOTION SETUP

ALARM SETUP

INTERVAL SETUP

TIME/DATE SETUP

PASSWORD SETUP

2. Factory Default