User`s manual

4Ch H.264 hardware codec
- Network DVR
17
4-8. PAN/TILT/ZOOM Camera Operation
4-9. Data Backup
Right-click to see icon bar and click [MENU] icon and go to ¡Backup¡.
1. Insert USB backup device and select the start time & date from which you want to back up.
※ The START & END time / date in HDD sub-menu only shows start and end of recording. This is
not selectable and editable.
2. To set start time of back-up and back-up data size, use a mouse (left/right/wheel button of a
mouse.
※ End time of back-up will be calculated automatically as per start time & date and the back-up
data size you set.
※ You can select the back-up data size (size of back-up data from start of back-up), but END of
back-up time is automatically determined by DVR itself.
3. Click ¡Back-up¡ then it starts USB back-up.
4. When back-up is completed, for the next USB back-up, start time of back-up shall be the end of
previous USB back-up, so that you can back-up from that time for continuous data back-up.
If you need another back-up, repeat the above procedure.
To stop backup, click ¡ESC¡.
※ During data back-up, it is impossible to cancel back-up process.
※ During data back-up, DVR does not record.
5. You can verify the back-up by installing and running the Backup Player on your PC.
BACK-UP
HDD
START 2006/JUL/08 AM10:10:23
END 2006/JUL/09 AM08:12:23
CD-R
START 2006/JUL/08 PM12:04:12
END 2006/JUL/08 PM08:12:23
SIZE 700MB -> 0MB
BURN ESC
BACK-UP
HDD
START 2006/JUL/08 PM 12:04:12
END 2006/JUL/08 PM 08:12:23
CD-R
START 2005/AUG/07 AM04:04:12
END 2005/AUG/08 PM08:12:23
SIZE 700 MB - > 700MB
BURN ESC
CHAP. 4 Operation
Click [PTZ] icon in the icon bar, then you can see ¡arrow¡ key & ¡+/-¡ key shown below.
Click these arrow keys to move a PTZ camera to each direction. By using ¡+/-¡ key, you can
control ZOON IN/OUT function. (¡+¡ : ZOOM IN / ¡-¡ : ZOOM OUT)
Created with novaPDF Printer (www.novaPDF.com). Please register to remove this message.