User`s manual

4Ch H.264 hardware codec

- Network DVR

5-2. DISPLAY SETUP

1) VGA SETUP

This is setup menu for display on the screen.

If you click ¡DISPLAY SET UP¡, then you change setting values for display as shown below.

VGA SETUP : Connection to a VGA monitor (CRT/TFT LCD), if optional VGA board is fixed on

the main board.

You can set ¡RESOLUTION¡ for VGA as shown below.

(VGA Default is 800X600.)

*If there is no VGA option board fixed on the main board or not detected correctly, it displays

¡No VGA BOARD¡

640X480 / 60Hz

800X600 / 60Hz

1024X768 / 60Hz

1280X1224 / 60Hz

640X480 / 75Hz

800X600 / 75Hz

1024X768 / 75Hz

1280X1024 / 75Hz

CHAP. 5 Set up

DISPLAY SETUP

VGA SETUP

SCREEN DISPLAY

OSD SETUP

ESC

VGA SETUP

RESOLUTION 800 X 600 / 75Hz

DEFAULT ESC

2) SCREEN DISPLAY

SCREEN DISPLAY

VERTICAL POSITION 24

HORIZONTAL POSITION 00

BOARDER ENABLE ON

BOARDER COLOR GRAY

DEFAULT ESC

** Please check the resolution range that your VGA monitor supports first before you use VGA monitor.

If you select high resolution such as 1024X768, 1280X1024 on VGA SETUP with VGA monitor that does

NOT support those high resolutions, image display may NOT be seen properly.

Created with novaPDF Printer (www.novaPDF.com). Please register to remove this message.