User`s manual

4Ch H.264 hardware codec
- Network DVR
27
5-5. EXTERNAL DEVICE
IP SETUP
MAC ADDRESS
DHCP MODE
IP PORT
IP ADDRESS
GATEWAY
SUBNET
00-0A-A2-00-FD-63
MANUAL
IP DETECT
50000
192.168.001.160
192.168.001.001
255.255.255.255
DEFAULT ESC
1) TCP/IP SETUP
TCP/IP function enables you to see live
pictures and recorded pictures via internet.
(1) IP SETUP :
Shows the network information assigned to
the DVR unit. If the DHCP setup status is
AUTOMATIC, you can set the IP port only
and if the DHCP setup status is MANUAL,
you must set all parameters.
If IP port number is blocked, a network
specialist¡s advice is needed.
CHAP. 5 Set up
EXTERNAL DEVICE
TCP/IP SETUP
PAN/TILT SETUP
MOUSE SETUP
AUDIO SETUP
SPOT SETUP
ESC
Set parameters of external devices connected to DVR
like Ethernet, PTZ camera, Spot monitor etc.
If you click ETERNAL DEVICE on the main menu, then
you will see the window shown on the right.
TCP/IP SETUP
IP SETUP
DDNS SETUP
CONNECTION SETUP
ESC
SPEED
SPEED 5
DEFAULT ESC
(2) SPEED SETUP
By adjusting this value, you may improve image
transmission speed over a network.
(Setting value : 1~9)
2) PAN/TILT SETUP
PAN/TILT SETUP
COMMAND SETUP
SPEED SETUP
ESC
COMMAND SETUP
CHANNEL
MODEL
PTZ ID
BAUDRATE
CMD DELAY
COMMAND
LENGTH
CODE
DEFAULT
01
PELCO-D
000
2400 BPS
1 MSEC
PAN/TILT STOP
16
00 00 00 00
00 00 00 00
00 00 00 00
00 00 00 00
ALL-DEFAULT ESC
PAN/TILT SETUP
PAN SPEED 7
TILT SPEED 7
ZOOM SPEED 7
FOCUS SPEED 7
DEFAULT ESC
 PTZ Camera setup
 PTZ Speed setup
Created with novaPDF Printer (www.novaPDF.com). Please register to remove this message.