User manual

11
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
for detailed pin definitions for different
models.
Alarm Out (selected models only)
Some models provide a terminal block for connection
to alarm output devices. Refer to Setup Guide for
detailed pin definitions for different models.
LAN Connector (RJ-45)
The DVR is capable of networking. Once the unit is
connected to the LAN network, users can remotely
access the unit through the remote software on a PC.
USB Connector (x1)
There is one USB port provided to allow users to
connect USB devices, such as USB mouse or USB
storage.
e-SATA
Users can connect an e-SATA storage device via
this port to expend HDD capacity of the DVR.
2nd e-SATA (selected models only)
Some models provide a second e-SATA port for
connection to an e-SATA storage device to export
recorded videos in the DVR.
RS232
The RS232 communication port is for connection
to a POS device.
Power Jack
The DVR has a 12V DC power connection jack. Please
connect the power adapter shipped with the unit.